AB4D Forum

Full Version: Auto-rotation FBX model
You're currently viewing a stripped down version of our content. View the full version with proper formatting.
Hi
I have a problem with model rotation.
Some models opened as rotated to 180 degrees.
[attachment=148]
But the same model opened correctly in "3D Model Viewerhttps://github.com/acgessler/open3mod

You can download the model here
https://drive.google.com/file/d/1mbE0fBs...sp=sharing

How to detect a correct rotation of the model and rotate if this required?

Thank you
I have also seen that the orientation of some models is not correct. I have no clue on how the correct orientation can be determined.

Maybe there is a problem in assimp library. The open3mod application that you mentioned uses a very old version of assimp library and there the model is correctly oriented.

[attachment=149]

But a newer assimp viewer that comes with assimp library also have some problems with  orientation - see the following screenshot where the person from the model should be visible from the side or from the front, but it is visible from upside down:

[attachment=150]